Skip to product information
49118
  • 49118
  • 49118
AMANA TOOL 49118 COVE BIT 1/2 RAD 1/2 SHANK

AMANA TOOL 49118 COVE BIT 1/2 RAD 1/2 SHANK

$53.93

Cove Router Bits

2 Flute with Ball Bearing Guide

The covetto form—produced by the cove bit—is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove as well to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round. Use in handheld or table-mounted routers. Large-diameter tools must be run at reduced speed. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life.

 RDBdLTool No.  1/161/21/21/4249092  1/85/81/21/4249094  3/163/49/161/4249100  3/163/49/161/22-3/849102  1/47/89/161/4249104  1/411/21/42-1/16RC-49104  1/47/89/161/22-3/849106  5/1619/161/42-1/849108  5/1619/161/22-3/849110  3/81-1/89/161/4249112  3/81-1/89/161/22-3/849114  1/21-3/83/41/42-1/449116  1/21-3/83/41/22-1/249118  5/81-5/811/161/22-1/24911918!3/4211/22-7/84912012!7/82-1/41-1/41/23-1/8†49121?12!12-1/21-1/41/23†49122?

†Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.

Replacement bearings #'s 49120, 49121 & 49122 use #47706.

All others tools use #47704 bearing.

Warning: Maximum RPM12! = 12,000; 18! = 18,000

 

Max RPM Guide for Amana Tool® Router Bits

 Do not exceed the maximum RPM shown for the particular tool you are using.

Max RPM for symmetrical tool only!

No exceda la maxima velocidad (RPM) indicada para cada herramienta.

Máximo RPM para la herramienta simétrica solamente!

Router Bit DimensionsMax RPM2" (Less than 50)28,0002" - 2-3/8" (50-60mm)22,0002-3/8" - 2-3/4" (60-70mm)19,0002-3/4" - 3-1/4" (70-80mm)16,0003-1/4" - 3-5/8" (80-90mm)15,0003-5/8" < (90-100mm)13,000

                

Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating.

You may also like