Skip to product information
49512
  • 49512
  • 49512
AMANA TOOL 49512 CORNER ROUND 3/8 RAD 1/4 SHK

AMANA TOOL 49512 CORNER ROUND 3/8 RAD 1/4 SHK

$36.59

Corner Rounding Router Bits

2 Flute with Ball Bearing Guide

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.

DRBdLTool No.---5/81/165/161/41-3/449492---5/81/165/161/22-1/449494---3/41/83/81/4249496---11/83/81/42-3/16RC-49496+---3/41/83/81/22-5/1649498---13/165/323/81/4249499---13/165/323/81/22-1/449501---7/83/161/21/4249500---7/83/161/21/22-7/1649502---11/41/21/4249504---11/41/21/42-1/16RC-49504++---11/41/21/22-7/1649506---1-1/85/161/21/42-1/1649508---1-1/85/161/21/22-7/1649510---1-1/43/85/81/42-3/1649512---1-1/43/85/81/22-9/1649514---1-3/87/165/81/22-9/1649515---1-1/21/23/41/42-1/449516---1-1/21/23/41/22-5/849518---1-5/89/163/41/22-5/84951714!1-3/45/87/81/22-3/44951914!23/411/22-7/84952014!2-1/47/81-1/41/23-1/164952114!2-1/211-1/41/23-3/16*49522?10!2-3/41-1/81-3/81/23-1/4*49523?10!31-1/41-1/21/23-1/4*49524?10!3-1/21-1/21-3/41/23-5/8*49526?

 

*Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.

Replacement bearing #47706.

+Replacement Knife #RCK-268 (2 Required) ++Replacement Knife #RCK-272 (2 Required)

Warning: Maximum RPM 10!=10,000; 14!= 14,000

?USE IN A TABLE MOUNTED ROUTER. NOT FOR USE IN A HAND HELD ROUTER!

Max RPM Guide for Amana Tool® Router Bits

 Do not exceed the maximum RPM shown for the particular tool you are using. Max RPM for symmetrical tool only!

No exceda la maxima velocidad (RPM) indicada para cada herramienta. Máximo RPM para la herramienta simétrica solamente!

Router Bit DimensionsMax RPM2" (Less than 50)28,0002" - 2-3/8" (50-60mm)22,0002-3/8" - 2-3/4" (60-70mm)19,0002-3/4" - 3-1/4" (70-80mm)16,0003-1/4" - 3-5/8" (80-90mm)15,0003-5/8" < (90-100mm)13,000

                

Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating.

 

You may also like