Skip to product information
55400
  • 55400
  • 55400
AMANA TOOL 55400 TONGUE/GROOVE ASSEMBLY 1/4"KER

AMANA TOOL 55400 TONGUE/GROOVE ASSEMBLY 1/4"KER

$92.64

Tongue & Groove Assembly Router Bits

3/8" - 1-1/8" Material

2 Flute

Cut perfectly fitted tongue-and-groove joints on stock between 3/8" and 1-1/8" thick with a table-mounted router and this assembly. The tool consists of an arbor with an integral shank, two identical, removable slotting cutters, and a pair of bearings. To cut tongues, sandwich one bearing between the two cutters. To cut slots, mount one cutter between the two bearings.

Tongue is cut as shown in assembly ‘A’. For groove cut,

reassemble the tool as shown in ‘B’. Instructions included.

øDBB1CødtLMaterial SizeTool No.1-5/817/3213/643/81/21/833/8"-1/2"55408*1-5/83/41/43/81/21/431/2"-3/4"554001-7/83/41/41/21/21/431/2"-3/4"554071-5/81-1/83/83/81/23/83-3/83/4"-1-1/8"55401

* 2 Piece Set

NOTE: USE IN A TABLE MOUNTED ROUTER. NOT FOR USE IN A HAND HELD ROUTER!

Max RPM Guide for Amana Tool® Router Bits

Do not exceed the maximum RPM shown for the particular tool you are using.

Max RPM for symmetrical tool only!

No exceda la maxima velocidad (RPM) indicada para cada herramienta.

Máximo RPM para la herramienta simétrica solamente!

Router Bit DimensionsMax RPM2" (Less than 50)28,0002" - 2-3/8" (50-60mm)22,0002-3/8" - 2-3/4" (60-70mm)19,0002-3/4" - 3-1/4" (70-80mm)16,0003-1/4" - 3-5/8" (80-90mm)15,0003-5/8" < (90-100mm)13,000

                

Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating.

You may also like