Skip to product information
45754
  • 45754
  • 45754
AMANA TOOL 45754 V GROOVE 1-1/4 DIA. 1/4 SHANK.

AMANA TOOL 45754 V GROOVE 1-1/4 DIA. 1/4 SHANK.

$98.96

'V' Groove Router Bits

2 Flute

Cut decorative ‘V’ grooves and lettering on signs with these ‘V’ Groove router bits. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers.

a°DBB1dLTool No.60°1/25/87/161/41-3/445705†90°3/87/163/161/41-5/84570090°3/87/163/161/224570290°1/21/21/41/41-5/84570490°1/21/21/41/22-1/84570890°5/81/25/161/41-5/84571090°5/81/25/161/224571290°3/45/83/81/41-3/44571490°3/45/83/81/22-1/84571690°7/85/87/161/41-7/84571890°7/85/87/161/22-1/44572090°15/81/21/41-7/84572290°15/81/21/22-1/44572490°1-1/43/45/81/22-1/24572690°1-1/415/165/81/42-13/6445751100°1-1/453/6417/321/42-3/3245752110°1-1/447/647/161/4245754120°(32mm) 1-1/421/3223/646mm1-15/1645742120°1-1/421/3223/641/41-59/6445756130°1-1/431/6413/641/41-3/445758150°1-1/47/1611/641/41-11/164577090°1-1/213/41/22-3/445728 18?90°21-3/411/23-1/445732 12?

Note: 90° 'V' Groove Bits are for decorative purposes and are not intended for 'miter-folding', etc.

*1/4" shank not recommended and not guaranteed.

†2 Flute 60° 'V' Groove Bit designed for lettering, signmaking and decorative work.

Warning: Maximum RPM 14! = 14,000; 18! = 18,000

?USE IN A TABLE MOUNTED ROUTER. NOT FOR USE IN A HAND HELD ROUTER!

Max RPM Guide for Amana Tool® Router Bits

Do not exceed the maximum RPM shown for the particular tool you are using. Max RPM for symmetrical tool only!

No exceda la maxima velocidad (RPM) indicada para cada herramienta. Máximo RPM para la herramienta simétrica solamente!

Router Bit DimensionsMax RPM2" (Less than 50)28,0002" - 2-3/8" (50-60mm)22,0002-3/8" - 2-3/4" (60-70mm)19,0002-3/4" - 3-1/4" (70-80mm)16,0003-1/4" - 3-5/8" (80-90mm)15,0003-5/8" < (90-100mm)13,000

                

Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating.

You may also like