Skip to product information
55380
  • 55380
  • 55380
AMANA TOOL 55380 CLASSICAL STILE AND RAIL ASSEM

AMANA TOOL 55380 CLASSICAL STILE AND RAIL ASSEM

$99.54

Reversible Stile & Rail Assemblies

2-Wing With Ball Bearing Guide

Use one tool for both cuts by reversing the assembly. Includes shims that give perfect alignment before and after sharpening. For best results, the rail cut should be done on a router table. With complete instructions.

Note: Stile & Rail assemblies can be used on 5/8" through 7/8" material. Tongue & Groove can be used on 1/2" through 3/4" material.

Pattern Type'A' RevealDB1B2dLTool No.Ogee3/81-5/811/167/81/2355350

 

Pattern Type'A' RevealDB1B2dLTool No.Traditional3/81-5/811/167/81/2355370

 

Pattern Type'A' RevealDB1B2dLTool No.Classical3/81-5/811/167/81/2355380

 

Individual ComponentsQuality Required for Tool No.Order #Description553505537055380AMS-25055352Profile Cutter, Ogee1------155372Profile Cutter, Traditional---1---155382Profile Cutter, Classical------11553541/4" Groove Cutter111247708Ball Bearing1112476121/2" Shank Arbor w/Nut111155356.05MM Shims333355357.10MM Shims3333554021.0MM Washers2222

 

·        Replacement bearing for Stile Cutters #47702 (3/8" dia.).

·        Replacement bearing for Rail Cutters #47701 (1/2" dia.).

·        Replacement collar for Rail Cutters #47724.

Warning: Not for use in a handheld router. Use a table mounted router.

Max RPM Guide for Amana Tool® Router Bits

Do not exceed the maximum RPM shown for the particular tool you are using.

Max RPM for symmetrical tool only!

No exceda la maxima velocidad (RPM) indicada para cada herramienta.

Máximo RPM para la herramienta simétrica solamente!

Router Bit DimensionsMax RPM2" (Less than 50)28,0002" - 2-3/8" (50-60mm)22,0002-3/8" - 2-3/4" (60-70mm)19,0002-3/4" - 3-1/4" (70-80mm)16,0003-1/4" - 3-5/8" (80-90mm)15,0003-5/8" < (90-100mm)13,000

                

Note: Please also refer to laser etching on router bit shank for most updated RPM speed rating.

You may also like